Crain Cutter 552H 5-1/2-Inch 40 Tooth Wood Blade for 555 Undercut Saw

Crain Cutter 552H 5-1/2-Inch 40 Tooth Wood Blade for 555 Undercut Saw Review

See more picture @ amazon.com

Crain Cutter 552H 5-1/2-Inch 40 Tooth Wood Blade for 555 Undercut Saw Feature

• Carbide Tipped for faster cutting and longer blade life
• 40 teeth for smoother cuts
• 5-1/2-inch blade for the 550C saw

Crain makes some very cool specialized saws for tricky cutting jobs like undercutting along walls, door jambs, and even under toe spaces to tear out underlayment. A special saw needs a special blade, and here it is. This 5-1/2" blade is packing 40 carbide-tipped teeth and produces a super-smooth cut. Sure, you can spend less on a steel blade, but in the long run, you're better off with carbide because it holds an edge far longer and gives you a better cut. Crain's made this blade for their 550C saw-—if that's what you have, this blade is what you need.--Kris Jensen-Van Heste Crain 552 5-1/2" Carbide-Tipped Saw Blade The new Crain 552 Saw Blade comes with 5-1/2" diameter, 40 Tooth, Carbide Tipped blade which is a Multi-Undercut Saw Blade. Made to be used with Crain Saw 555. More Details About Crain 552 5-1/2" Carbide-Tipped Saw Maximum Safe Speed: 12,000 rpm The Crain 552 Carbide-Tipped Saw Blade is a replacement Blade for Crain C550 Jamb Saw

QEP 10-46 Saw,Jamb

QEP 10-46 Saw,Jamb Review

See more picture @ amazon.com

Jamb Saw

Floor King 45020 Comparable to Roberts 10-42, 4-1/4 Dia x 20 Teeth x 20mm Bore (with 5/8" bushing) x

Floor King 45020 Comparable to Roberts 10-42, 4-1/4 Dia x 20 Teeth x 20mm Bore (with 5/8" bushing) x Review

See more picture @ amazon.com

Floor King Carbide Tipped 4-1/4 Dia x 5/8 Inch & 20mm Bore Saw Blade, Comparable to Roberts 10-42, Designed for Jamb/Undercut 10-40 & 21600 Saws

ROBERTS 10--55 Longneck Jamb Saw,6 3/16 In,120V,7.5 Amp

ROBERTS 10--55 Longneck Jamb Saw,6 3/16 In,120V,7.5 Amp Review

See more picture @ amazon.com

Longneck Jamb Saw, 120V, 60 Hz, 7.5 Amp Motor, 8000 No-Load RPM, 6 3/16 In Carbide Tooth Blade, Arbor Size 5/8 In Dia, Blade Adapter 20mm, Height Adjustment from 0 to 1/16 In, Trims Wood Door Jambs And Base Boards, Cuts Inside Corners And Under Toe Kicks, Includes Molded Carrying Case And 6 3/16 In Carbide Tipped Blade

ROBERTS 10-47-2 Jamb Saw Blade,6 3/16 In,Carbide Tip

ROBERTS 10-47-2 Jamb Saw Blade,6 3/16 In,Carbide Tip Review

See more picture @ amazon.com

Jamb Saw Blade, 6 3/16 In Carbide Tooth Blade, For Use With G2834982 Jamb Saw

Bosch 1640VSK Fine Cut Finishing Saw Kit with Miter

Bosch 1640VSK Fine Cut Finishing Saw Kit with Miter Review

See more picture @ amazon.com

Bosch 1640VSK Fine Cut Finishing Saw Kit with Miter Feature

• 3.5 amps, 2,000-2,800 RPM
• Precision sawing,-including flush cutting-inch wood, wood composites, and plastics
• Variable Speed - match speed to work-piece and task
• Flush-cutting ability - blade can lie flat on work surface while cutting
• Blades mount on left or right side for excellent visibility and total versatility

It might look like the world's largest safety razor, but Bosch's fine-cut saw is a handy little niche tool. Essentially just an electric handsaw, the 1640VSK was designed for flooring installers and remodelers. It feels good in your hand, with a nice grip and contoured angles. The large on/off switch is conveniently located where your thumb would rest. The blades mount easily, too, with the option of mounting to either side. Though the saw doesn't look powerful, we were impressed with its smooth operation. It's precise and works equally well with wood, composites, and plastic. It makes a cleaner cut by far than a reciprocating saw and fits into much smaller places. We used ours to shorten a bunch of door trim before installing new kitchen flooring. It worked great. Why not just use the old handsaw? Well, good question. We guess it depends on how often you have to make these sorts of cuts (and how tired you are of banging your knuckles while making them). The saw also comes with a miter table attachment--which we have to admit we'd be unlikely to use, owning as we do a nice compound miter saw. A floor installer, however, might think it worked just fine. --Michael Shilling

Paws Off Tools FCA-007 Flush Cut Adapter

Paws Off Tools FCA-007 Flush Cut Adapter Review

See more picture @ amazon.com

Paws Off Tools FCA-007 Flush Cut Adapter Feature

• Turn a reciprocating saw into a flush cutting saw effortlessly
• Reduce costly mistakes, while saving materials
• Reduces broken blades
• Flush cut pipes, trim and moldings
• 1/2 Universal tang fits brand name reciprocating saw

The Paws Off Tools reciprocating saw flush-cut adapter allows you to make flush cuts in hard-to-reach areas. U.S.A.

Dremel SM600 3-Inch Multi-Purpose Flush Cut Carbide Wheel

Dremel SM600 3-Inch Multi-Purpose Flush Cut Carbide Wheel Review

See more picture @ amazon.com

Dremel SM600 3-Inch Multi-Purpose Flush Cut Carbide Wheel Feature

• Cutting wheels cut all common residential materials: wood, metal, plastic, and tile
• Up to 3/4-Inch Depth of Cut- 3-Inch cutting wheels to power through up to 3/4-Inch oak
• 2 Types of Cutting Wheel - Traditional flat wheel and a domed flush cut wheel for door jambs, bevel cuts, and tight places
• Innovative Cutting Guides - Cutting guides that help cutting common household materials like 2-Inch by 4-Inch, baseboard, and door/window casing

Use the 3-Inch Multi-Purpose Flush Cut Carbide Wheel SM600 to cut a door jamb or along a baseboard when installing a new floor.

Fein 4-30-33-087-06-5 Replacement Accessory Screw Set

Fein 4-30-33-087-06-5 Replacement Accessory Screw Set Review

See more picture @ amazon.com

Fein 4-30-33-087-06-5 Replacement Accessory Screw Set Feature

• "Triangle sander screw set for use with FEIN MutliMasterTM models MSx 636, MSx 636-1, and MSx 636-II"
• Includes one screw for pads and one screw for blades

Set of clamping screws Mounting screw set for earlier FEIN MultiMaster models MSx 636, MSx 636-1, and MSxe636 II.